TTMhe.gif (1131 bytes) Mouse House Enterprises, Australia


Mouse Armour

Go to the catalogue

MA125 1/35 scale ASLAV 25 PHASE 3 with turret bar armour 2005+

This conversion set comprises:

  • Modified Phase 3 trim vane
  • Bar armour attachment pieces
  • Bar armour turret bins
  • MA117 Platt mount
  • MA310 Photoetch ASLAV engine mesh
  • side stowage bin
  • large PE fret for bar armour
  • Photoetch fret for light mounts tiedowns, ATGW cutters
  • evergreen rod for bar armour
  • flasher and siren units
  • 25mm fluted barrel with accurate muzzle brake
  • lots of bolt heads
  • wire for wiring harness

The set does not include the spare wheel carrier as not all ASLAV 25 carried them at all times.  The spare wheel carrier is available as MA116 ($15.00) and the spare wheel as MA124 ($4.50), which may be purchased separately. 

If you use the Trumpeter XML tyre set then you will need correct pattern hubs, which are available as MA121 ($10.00).

Included in MA125 set above

MA117 ASLAV / LAV 25 FN MAG 58 machine gun on Platt mount.

Note that the conversion comes with the dual ammo bin holders for both the MAG 58 (US equivalent M240) as well as the Minimi (US equivalent M249). 

The mount has been molded separately so that the modeller has the choice of the arms being in the stowed or swung out position.

 

Used on ASLAV 25s and some  ASLAV PCs since 1997

MA322 1/35 ASLAV MEAO* Communication Update 2003+     

This provides a modified Phase 3 trim vane, a range of accurate antennae for ASLAV 25 and ASLAV PC hulls and includes one set of sirens and flasher units.

There are sufficient pieces for at least two vehicles depending on the vehicle to be modelled.

Actual antennae are not included.  These can be made from wire (guitar "G" string) stretched sprue, brush bristles, carbon fibre etc

* MEAO - Middle east Area of Operations


© Copyright Sentinel 2000-2008. All material on this site is copyright and should not be used without the webmaster's permission or that of the contributor

Mouse House Index