ACM35851 1/35 ASLAV 25 Phase III with turret bar armour 2005+ (includes 3 PE frets) 

This conversion kit is designed to update and correct the 1/35^th Trumpeter ASLAV-25#000392  into an ASLAV- 25 Phase III as used by  SECDET (Security Detachment) VB to VIIB circa 2004-2005 Op Catalyst Iraq. Other kits from Arms Corps Models and Mouse House can be used to enhance the kit even further to incorporate other communication equipment and stowage used later in the conflict within the Australian SECDET AO and in Southern Iraq (AMTG and OBGW).

ACM35852 1/35 Phase III ASLAV 25 update for Trumpeter ASLAV 25 (Australia 2004+ / Afghanistan 2006+)

This conversion resin model kit is designed to correct and update the 1/35^th Trumpeter ASLAV-25 #00392 into an ASLAV- 25 Phase III as used in Australia 2002+ and ASLAV's used in Afghanistan 2006 onwards. ASLAV's in Afghanistan up until mid 2007 were standard Phase III's. Then the other mods were introduced. As of mid 2009 some ASLAV-25 have been seen sporting Bar armour (ACM35851). These are spare vehicles left over from Iraq operations. This kit can be used with other Arms Corps Models and Mouse House (MH) products to depict ASLAV-25’s used in SECDET (Iraq) from 2008. 

Other Mouse Armour products include MA116 (Spare tyre rack) and MA121 (Wheel hubs).

Other Arms Corps Models products include ACM35858 (ASLAV Communication’s update), ACM35860 (Spare XML tyre), ACM35859 (Weighted/bulged XML Wheels) and ACM/MH MA317 (Complete Equipment Schedule).

ACM35853 1/35 Australian Abrams AIM update set (designed for Dragon M1A2 SEP kit)

This conversion kit is designed to back date the Dragon Model Kit of a M1A2 SEP #3536 into the Australian version of the M1A1 AIM SA as used by 1 Armoured Regiment and the School of Armour.

ACM35854 1/35 ASLAV engine deck mesh

This Photo Etched Engine Deck is designed to fit all ACM/MH ASLAV engine decks. It is not designed to replace the PE in the Trumpeter ASLAV kits.

ACM35855 1/35 M113A1 engine deck mesh

This Photo Etched engine deck mesh is designed to fit all Tamiya and Academy M113 engine decks.

ACM35856 1/35 M242 25mm Bushmaster barrel (1 piece in resin)

This conversion/add-on kit is designed to a upgrade any injection plastic or resin 1/35^th model kits M242 Bushmaster Chain Gun Barrel to the correct version with the 3 rows of 4 “Flutes” on the flash suppressor.

ACM35858 1/35 ASLAV MEAO Communication Update 2003+

This conversion/update kit is designed to update 1/35^th Arms Corps Models ACM35851 ASLAV- 25 Phase III with Bar Armour into ASLAV-25’s used in the Iraq Area of Operations (AO) from 2005-2008+, whilst serving with Security Detachment (SECDET), Al Muthanna Task Group (AMTG), Overwatch Battle Group –West (OBG-W), and Operation Slipper Mentoring Reconstruction Task Force (MRTF 1 and 2) in Afghanistan from 2009 onwards. 

It can also be used for the 1/35^th Mouse House MA120 ASLAV PC in conjunction with MA129 ASLAV PC Phase III Upgrade to construct a vehicle from the same deployments as above. Some parts of this kit can also be used towards construction of an updated Phase III Type III Fitters or Recovery within the MEAO.

ACM35859 1/35 XML bulged / weighted tyres for ASLAV / LAV FOV (8) 

This resin wheel set is designed to replace the vinyl wheels in all Trumpeter LAV and ASLAV series of kits. These resin XML’s are depicted with the correct tread type, hub depth , side wall reinforcing as well as weighted tyres.

ACM35860 1/35 XML Spare Wheel

This spare XML wheel is designed to replace the vinyl spare wheel in all Trumpeter LAV and ASLAV series of kits. This resin XML is depicted with the correct tread type, rim detail and side wall reinforcing.

ACM35861 1/35 Modern 30 cal ammo liners Decals White

This set provides Australian .30 Cal and 7.62mm Ammunition Liner Markings in white used from 1960's throughout to 2008 and onwards.  This can be used for all standard NATO army weapons of this calibre.  The markings that the Australian Army uses are NATO based.

The decals are designed to add decal markings (up to 20 sets can be made) as seen on Australian Ammunition Liners.

ACM35865 1/35 Modern 30 cal ammo liners Decals Yellow

This set provides Australian .30 Cal and 7.62mm Ammunition Liner Markings in yellow used from 1960's throughout to 2008 and onwards.  This can be used for all standard NATO army weapons of this calibre.  The markings that the Australian Army uses are NATO based.

The decals are designed to add decal markings (up to 20 sets can be made) as seen on Australian Ammunition Liners.

ACM35862 1/35 Modern 50 cal ammo liners Decals White

This set provides Australian .50 Ammunition Liner Markings in white used from 1960's throughout to 2008 and onwards.  This can be used for all standard NATO army weapons of this calibre.  The markings that the Australian Army uses are NATO based.

The decals are designed to add decal markings (up to 20 sets can be made) as seen on Australian Ammunition Liners.

ACM35866 1/35 Modern 50 cal ammo liners Decals Yellow

This set provides Australian .30 Cal and 7.62mm Ammunition Liner Markings in yellow used from 1960's throughout to 2008 and onwards.  This can be used for all standard NATO army weapons of this calibre.  The markings that the Australian Army uses are NATO based.

The decals are designed to add decal markings (up to 20 sets can be made) as seen on Australian Ammunition Liners.

ACM35863 1/35 Modern 25mm ammo liners Decals White

This set provides Australian 25mm Ammunition Liner Markings in white used from 1980's throughout to 2008 and onwards.  This can be used for all standard NATO army weapons of this calibre.  The markings that the Australian Army uses are NATO based.

The decals are designed to add decal markings (up to 6 sets can be made) as seen on Australian Ammunition Liners.

ACM35867 1/35 Modern 25mm ammo liners Decals Yellow

This set provides Australian 25mm Ammunition Liner Markings in yellow used from 1980's throughout to 2008 and onwards.  This can be used for all standard NATO army weapons of this calibre.  The markings that the Australian Army uses are NATO based.

The decals are designed to add decal markings (up to 6 sets can be made) as seen on Australian Ammunition Liners. 

ACM35864 1/35 Continuous Tie Downs/Footman Loops 

Most plastic and resin kits that have tie down points or footman loops are represented as just rectangular blobs. These tie downs will allow the modeller to add more detail to their kit. They are not as easy to work with as PE but look authentic once added to the kit. There are 5 x 80mm lengths per kit.

ACM35868 1/35 7.62mm/.30cal Ammunition Liners X 10

This kit supplies the modeller with 10 7.62mm/.30cal resin ammunition liners and a section of linked ammunition. 5 of the liners are cast solid, 3 liner’s with ammunition and the liner lid cast separately and 2 empty liners with the lid cast separately. A handy tool is also supplied with this kit to help the modeller remove the empty liner so it is not crushed during the removal of the casting block.

ACM35869 1/35 .50cal Ammunition Liners X 10

This kit supplies the modeller with 10 resin .50cal ammunition liners and a section of linked ammunition. 5 of the liners are cast solid, 3 liners with ammunition and the liner lid cast separately and 2 empty liners with the lid cast separately. A handy tool is also supplied with this kit to help the modeller remove the empty liner so it is not crushed during the removal of the casting block.

ACM35870 1/35 25mm Ammunition Liners X 6

This kit supplies the modeller with 6 resin Australian pattern 25mm ammunition liners.

© Copyright Sentinel 2000-2010. All material on this site is copyright and should not be used without the webmaster's permission or that of the contributor

Home